Orca Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of tracked skid steer loader in China. With abundant experience, we are committed to providing high quality customized service for global clients. Please feel free to buy discount tracked skid steer loader from our factory.

Product Overview
Many tracked skid steer loaders look alike on spec sheets. You have dealt with the pain: soft wet ground stalls wheeled units, cheap tracks tear quickly, delayed compliance paperwork holds up your site handover, and support vanishes once the container leaves.
We built this tracked skid steer loader for contractors and rental operators who need predictable performance, not just advertised numbers. Its low ground pressure keeps surfaces intact on turf, clay and subbase. It ships pre‑prepared with Tier 4 / Stage V documents, and our fixed undercarriage design cuts premature wear.
It will not beat a wheeled model on hard pavement. But when your job demands traction, site protection and reliable backup, this machine fits the gap many generic alternatives miss.
Technical Specifications
| Parameter | Value |
| ENGINE | |
| Engine Brand | Briggs & Stratton 25T2 |
| Rated Power & Speed | 13.5HP/3600rpm |
| Fuel Tank Capacity | 28L |
| Hydraulic Oil Tank Capacity | 20L |
| Optional Engine Configurations (Stage II / EPA / Euro V) | Briggs & Stratton 25T2 / Hox:390 / Honda GX390 / Runtong 420cc / Kopu 192 / Changchai 192 |
| PERFORMANCE PARAMETERS | |
| Max. Load Capacity | 380KG |
| Bucket Capacity | 150L |
| Max. Digging Force | 450Kg |
| Travel Speed | 0-5.5Km/h |
| Machine Net Weight | Wheel Type: 710kg / Track Type: 780kg |
| Traction Force | 520KG |
| Gradeability Angle | 30° |
| PRODUCT PARAMETERS | |
| Max. Operating Height | 2200mm |
| Max. Pin Height | 1900mm |
| Max. Dump Height | 1560/1800mm |
| Max. Dump Reach | 348mm |
| Dump Angle | 55° |
| Rollback Angle | 30° |
| Bucket Rollback Angle (Ground Position) | 25° |
| Departure Angle | 11° |
| Overall Height | 1350mm |
| Ground Clearance | 100mm |
| Wheelbase | 860mm |
| Overall Length (Without Bucket) | 1780mm |
| Overall Width | 1200mm |
| Bucket Width | 1190mm |
| Overall Length (With Bucket) | 2500mm |
| Turning Radius | 1307mm |
| TIRE / TRACK MODEL | |
| Herringbone Industrial Tire | 18*8.5-8 |
| Track Model | 180/60/46 |
| EXPORT PACKING | |
| Fumigation-Free Wooden Case Packing | 2070*1250*1460mm |
| Stackable Steel Frame Packing | 2190*1200*2540mm |
Product Features
Rubber tracks on a triangulated frame spread the load so a loaded machine can cross a lawn, a paved driveway or a graded subbase without marking it. Track tension is set from the frame, not from under the machine.
Low range for digging and grading, high range for moving between work areas on a large site. Shifting is on the joystick.
Standard flow handles buckets, forks, breakers and augers. If the plan includes a mulcher, a cold planer or a wide rotary broom, order the high-flow option - the standard circuit will run them, but not well, and that is a common and expensive mistake.
ROPS/FOPS certified cab, suspension seat, pilot-joystick control, rear camera on the standard build. The arms sit outside the lift path, which keeps head clearance reasonable in low structures.
Engine hood opens to the full block; filters and the battery are reachable from ground level. Daily checks do not require climbing.
Applications
Site prep & utility works
Wet, muddy lots kill wheeled skid steers. This tracked skid steer loader moves grading material and dig-out debris without sinking or rutting finished subgrade, saving you costly rework.
Landscaping & turf jobs
Delicate lawns and paved patios stay intact. It handles pallets, topsoil and tree relocation; no more fines or re-sodding after machine passes.
Interior & light demolition
Compact frame fits tight access ways. It hauls rubble inside buildings without scratching finished concrete or disrupting surrounding surfaces.
Rental fleet use
It accepts most common attachments. One unit covers multiple jobs, reducing your fleet size and cutting downtime between different customer projects.
Services and Support
Every unit ships with a parts catalogue, hydraulic schematic and troubleshooting guide in English. Wear parts - tracks, rollers, sprockets, filter sets - are held as stock items for the life of the model, so a machine bought this year is not orphaned in five years. Technical questions during commissioning go to the same engineer who handled the order, not to a general inbox.
Warranty terms are stated in the quotation and cover the structural components and the hydrostatic drive. Commissioning support and operator handover can be arranged on site or by video, whichever suits the project.

FAQ
Q: Does this tracked skid steer loader work well on sharp, rocky ground?
A: The rubber tracks can withstand regular rocky use, but frequent contact with jagged rock speeds up wear. We can share alternative track options if your sites are mostly rocky.
Q: Can I swap attachments from my existing skid steer onto this machine?
A: It matches the standard universal quick attach. Just double-check your attachment's hydraulic flow requirement before fitting.
Q: What paperwork comes with the machine for customs and local inspection?
A: We provide full compliance declarations and supporting documents. You still need to confirm your local operating rules ahead of arrival.
Q: Are structural frame parts covered under the standard warranty?
A: Loader arm and main frame defects are included. Normal wear items like tracks and rollers sit outside warranty coverage.
Q: Is there any limit to the slope this machine can safely operate on?
A: Stick to gentle slopes for stable work. Steep side slopes raise rollover risk, regardless of the machine's traction.


